The PLC-XD2200 projector from Sanyo is 2200 ANSI, XGA resolution with dual data and video inputs.
Network monitoring and control allow the projector to be managed remotely and enable an administrator to switch the projector into standby at the end of the day. Standby power consumption of less than 1 Watt and extended lamp life of up to 6000 hours reduces the Total Cost of Ownership of this projector and minimise its impact on the environment.
Display Technology: 0.55 inch TFT Poly x 3
Aspect Ratio: 4:3
Throw Ratio: 1.62 to 1.92 : 1
Brightness: 2200Lumens
Contrast Ratio: 500:1 (Static) , (Dynamic)
Lens: F2.0 - 2.15 f=0.72 - 0.87 inch
Lens: Type manual zoom and focus
Projection Lamp: 215W UHP
Lamp Life: 6,000Hours
Horizontal Frequency: 15 to 100KHz
Vertical Frequency: 50 to 100Hz
Keystone correction: Vertical: ñ30ø
Number of Image Dots: 2,359,296
Remote Controller: IR Remote
Speakers: Yes , 1W
VGA Ports: 2 x 15-pin D-sub , 1 x 15-pin D-Sub
Video Composite: In 1 x RCA
Audio Out: 1 x Stereo Mini-jack
RJ-45 Ports: 1 x RJ-45
Serial Interface: 1 x 9-pin D-Sub RS-232-C
Supported Video Source: NTSC / PAL / SECAM / NTSC4.43 / PAL-M / PAL-N
Compatibility Input signal compatibilty: UXGA/ WXGA/ SXGA+/ SXGA/ XGA/ SVGA/ VGA/MAC/ 1080i/50,60 / 1035i/ 720p/ 480p/ 480i/ 575p/ 575i
In The Box XD2200 Projector • Power cord • VGA cable • Lens Cap • Remote control with.Battery • Quick reference guide • Owner`s Manual(CD-Rom) • PJ-Net Manager(CD-Rom) • PIN code Label
Please note this product is delivered direct from our supplier and may take a little longer to arrive.